The SPX-T delivers the best spec performance in the line. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices.

The SPX-T Series includes models SPX3242, SPX3243, SPX3342, SPX3343, SPX3290, SPX3291, SPX3390, and SPX3391.

Specifications:

- 4-20mA loop-powered output

- +/- 0.15% accuracy available

- Reduced temperature drift by 80% over non compensated units

- Temperature output available (RTD or 4-20mA)

- Wide selection of pressure ranges available

- Turndown 6:1

- Configurations available for use in hazardous locations

- Remotely configurable via HART

- Precise, repeatable pressure measurements

- Output supplied directly to DSC or PLC

- Meets CE requirements

- CE ATEX Intrinsically Safe Approved

- FM Explosion proof approved

- CSA Explosion proof approved

- SIL 2 Certified (pressure output)

- PL'c' Certified (relay output)

- Additional approvals are available

The Dynisco SPX 5-Series is a smart 4-20mA pressure transmitter that includes DynaLarity™, a Dynisco innovation that uses an advanced algorithm that will linearize offsets due to process effects on the sensor.  The SPX 5-Series is an all welded construction designed for use in hazardous locations and is available with a variety of process and electrical connections.

The SPX5 Series includes models SPX5342, SPX5343, SPX5344, SPX5390, SPX5391, and SPX5392.

Specifications:

- 4-20mA loop-powered output

- Improved accuracy with Dynalarity ±0.2% available

- Wide selection of pressure ranges available

- Turndown 3:1

- Configurations available for use in hazardous locations

- Remotely configurable via HARTTM

- Precise, repeatable pressure measurements

- Output supplied directly to DSC or PLC

- Meets CE requirements

- CE ATEX Intrinsically Safe Approved

- FM Explosion Proof Approved

- CSA Explosion Proof Approved

- SIL 2 Certified (Pressure Output)

- PL'c' Certified (Relay Output)

- Additional approvals are available

The PT46x4 sensor provides the industry standard 4-20 mA amplified signal designed to work with DCS and PLCs. The PT46X4 comes equipped with adjustable zero and span side-mounted potentiometers. PT46X4 Series mA sensors can be rezeroed in two ways: locally via the zero potentiometer, or remotely via shorting two pins together (contact closure). Optional thermocouple or RTD configurations are available to provide melt temperature. Features a 1/2-20 UNF thread for simple and easy installation in standard transducer mounting holes.

The PT46X4 Series includes models PT4604, PT4624, PT4634, TPT4604, TPT4624, and TPT4634. 

Specifications:

- Adjustable zero and span, via side-mounted pots

- Accuracy better than ±0.5%

- DyMax® coated stainless steel wetted parts

- 4-20 mA output

- 0-500 to 0-30,000 psi

- Internal 80% shunt calibration

- 3rd-party agency analysis (exida™) and self-certified based on FMEDA analysis and internal audit

- Output signal meets Performance Level ‘c’ as defined by the Machinery Directive (Category 1)

- Meets the following compliance directives, when properly installed and used:

  - –SIL2

  - Machinery Directive EN ISO 13849-1

The PT46X6 transmitters provide the industry standard 0 - 10 Vdc amplified signal designed to work with DCS and PLCs, 1 - 11 Vdc outputs are also available. The PT46X6 comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X6 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

The PT46X6 Series includes models PT4606, PT4626, PT4636, TPT4606, TPT4626, and TPT4636. 

Specifications:

- Adjustable zero and span

- Accuracy better than ±0.5%

- DyMax® coated stainless steel wetted parts

- 0 - 10 Vdc and 1 - 11 Vdc outputs

- 0 - 500 to 0 - 30,000 psi

- Internal 80% shunt calibrations